Steel Coil Slitting • Ohio Pickling & Processing

Unparalleled Flexibility

We are one of the few toll processors in the region with the ability to slit hot rolled, cold rolled and coated steel coils from .024" to .625" in thickness up to 72” wide into widths as narrow as 3”, or 2” on lighter gauges. Our specialized high-precision equipment enables us to perform quick set-ups with close tolerances and conversions and meet short processing times.

Slitting

Specifications

	Stamco .125" x 60”	Braner .250" X 72"	Paxson .375" X 72”	BRANER .625" x 72"
Materials	HR, HRP&O, HRPDR, CR, Coated	Surface Critical CR, Coated, HRP&O, HRPDR	HR, HRP&O, HRPDR, CR, Coated	HR, HRP&O, HRPDR, CR, Coated
Grades	CQ, HSLA	CQ, HSLA, AHSS, UHSS	CQ, HSLA	CQ, HSLA
Maximum Tensile Strength	100 KSI (689 MPA)	290 KSI (2000 MPA)	100 KSI (689 MPA)	60 KSI (414 MPA)
Minimum Gauge	.056"	.024"	.100"	.135"
Maximum Gauge	.126′′ CQ .112′′ HSLA	.250"	.375′′ CQ .312′′ HSLA	.625"
Minimum Width	12′′ entry 2′′ exit	12"entry 1.75" exit	18′′ entry 3′′ exit	18" entry 3" exit
Maximum Width	62′′ entry 60′′ exit	74" entry 72" exit	74′′ entry 72′′ exit	72" entry 72" exit
Coil I.D.	24′′–30′′ entry 20′′ or 24′′ exit	20"–32" entry 20" or 24" exit	24′′–30′′ entry 20′′ or 24′′ exit	20-30" entry 24" exit
Minimum Coil O.D.	30" entry/exit	30" entry/exit	30" entry/exit	30" entry/exit
Maximum Coil O.D.	74′′ with 28′′ I.D. 72′′ with 30′′ I.D.	84" entry 75" exit	74′′ with 28′′ I.D. 72′′ with 30′′ I.D.	72" entry/exit
Maximum Coil Weight	60,000 lbs	70,000 lbs	60,000 lbs	50,000 lbs

Call. Click. Quote.

At Ohio Pickling & Processing, we’re committed to getting you the information you need...when and how you need it. From a cursory call to get the conversation started, to a comprehensive quote to pinpoint all the pertinent particulars, we’re here to answer any and all of your questions.

Request a quote

[email protected] | (419) 241-9601

Carbon Steel Coils